eSun eLastic Resin - Transparent Yellow - 500g

The release rate is relatively high and easy to print, lower hardness and the molded parts are softer and more elastic; meanwhile the bending performance is improved to make the thick parts can withstand more times and large Angle bending. The elastic resin can be used on product models that require softness.

Resin Model: eResin-Elastic

Hardness (A): 70A

Tensile Strength (MPa): 4-5

Elongation at Break (%): 250-350

Printing Thickness (mm): 0.025-0.05

Printing Bottom Exposure Times (s): 60

How to Use:

1.Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.

2.Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.

3.Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.

4.Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more)

Safe Package:

Thickened aluminum bottle completely protected from light. Leak-proof bottle fully wrapped with a plastic bubble bag to make sure the resin stays in place where they belong.