ColorFabb PLA Special Filament - 1.75mm - 750g
CopperFill:
As a variation on bronzeFill, copperFill is a true stunner. Now you can print with copper on your desktop 3D printer! The true value of this PLA/PHA based 3D printing filament comes to light when you sand and polish your print. It transforms from a red-brown clay like print into a work of art. With the added weight of real copper in the filament, copperFill is the perfect material for statues and other mementos that need to have a non-printed look.
Specifications
- Suggested Printing Temperature: 195 - 220 °C
- Suggested Bed Temperature: 50 - 60 °C
- Suggested Printing Speed: 40 - 100 mm/s
CorkFill:
corkFill is the most welcome variation on the woodFill filament. colorFabb has opted for specifically sourced cork, and combined it with their PLA/PHA material. Its dark brown color compliments the lighter woodFill and makes for a great addition to your filament collection. You can give your prints a special look, like it was part of nature.
Specifications
PRINTING GUIDELINES
- Suggested Printing Temperature: 210 - 230 °C
- Suggested Bed Temperature: 50 - 60 °C
- Suggested Printing Speed: 40 - 60 mm/s
TIP! For stronger prints and better reliability, you can increase the flow rate with about 4 - 10 %.
GlowFill:
And when the lights go out, there is glowFill. When you print it, with regular lights on or during the day, it is a very nice, creamy filament with a very smooth finish. Nice as it is, it changes when the lights go out. Then you will see it glow. A special highly concentrated phosphorescent pigment is matched with colorFabb’s PLA/PHA compound, so it’ll print just like their other PLA/PHA 3D printing filaments. It is by far one of the most fun filaments which can lead to some fantastic prints.
Specifications
PRINTING GUIDELINES
- Suggested Printing Temperature: 195 - 220 °C
- Suggested Bed Temperature: 50 - 60 °C
- Suggested Printing Speed: 40 - 100 mm/s
TIP! For a better and longer lasting glow time, you can print your models with 100% infill and charge up your models with some high power lights, or just let them enjoy the sunlight for a bit.
SteelFill:
“Steel yourself!” With steelFill, you can give your print a very cool and shiny metal look. With post-processing like sanding and polishing, you can make it look truly special, like a part forged in a metal workshop. steelFill has slight magnetic properties.
Please note: The high steel content of the steelFill material makes this filament quite abrasive to brass nozzles. Therefore, it’s recommended to print with abrasive resistant nozzles, for instance the E3D hardened steel nozzle, the JET RSS50 and performance 3-d Hercules nozzles.
Specifications
PRINTING GUIDELINES
- Suggested Printing Temperature: 190 - 210 °C
- Suggested Bed Temperature: 50 - 60 °C
- Suggested Printing Speed: 40 - 80 mm/s
WoodFill:
woodFill is colorFabb’s first special filament, and it is one of those perennial fan favorites. Its enduring appeal is very clear: easy to print, that typical woodshop smell while printing and a stunning result. woodFill contains recycled wood fibers and remains from a different production process. This is combined with colorFabb’s signature PLA/PHA compound making woodFill a real bio material.
Please note: As there are slight color differences between different batches of wood fibers, the natural wood color between different batches of the filaments may also differ slightly.
Specifications
PRINTING GUIDELINES
- Suggested Printing Temperature: 195 - 220 °C
- Suggested Bed Temperature: 50 - 60 °C
- Suggested Printing Speed: 40 - 100 mm/s