Phrozen Protowhite Rigid Resin -1000g

$630

-
1
+

Description

-

Protowhite Rigid Resin - Design Prototyping Made Easy

Empowered by one of the most prestigious chemical company BASF Forward AM , Phrozen Protowhite Rigid Resin enables designers to conduct in-house prototypes efficiently before moving onto the manufacturing stage.



Benefits

  • Rigid Resin Empowered by BASF Forward AM: Phrozen Protowhite Rigid Resin empowers industrial designers to solve design challenges and increase efficiency during the design validation phase by creating rigid and impact resistant 3D models.

  • Visualize Your Design Ideas With Ease: Turn conceptual ideas into complex 3D models to showcase small batches of high-quality prototypes for more efficient communication.

  • Best for Prototype Developments: Experiment and compare various 3D printed prototypes such as mechanical parts, jigs, fixtures, and glasses to refine design usability.

  • Save Time With Rapid Prototyping: Demonstrate 3D models and gather feedback from peers to identify improvements and reduce risks of design defects before going into full-scale production.



Resources



Precautions

  • Way to Rinse: Clean with alcohol spray with an air gun. DO NOT immerse the model into alcohol for a long time.

  • Use and preserve resins in room temperature, and in dark and ventilated conditions

  • Shake well before each use

  • After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.

  • Keep resin away from kids and away from direct sunlight exposure

  • Wear gloves and masks during the operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.

  • DO NOT dump resin. Please cure it and treat it as general plastic garbage.

  • After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year.


Specifications

-
  • Density: 1.1 g / cm3

  • Viscosity 30°C: 220 mPas

  • E Modulus: 2300 MPa

  • Ultimate Tensile Strength: 57 MPa

  • Elongation at Break: 15 %

  • Flexural Modulus: 1920 MPa

  • Flexural Strength: 94 MPa

  • Charpy notched, 23 °C: 1.9 kJ/m²

  • HDT at 1.82 MPa: 49 °C

  • Surface Hardness, Shore D: 77 Shore D


*All specifications have been tested in a laboratory. Please note that certain specifications may be subject to change without prior notice.


  • Phrozen Protowhite Rigid Resin -1000g
Phrozen Protowhite Rigid Resin -1000g
Phrozen Protowhite Rigid Resin -1000g
Phrozen Protowhite Rigid Resin -1000g
Phrozen Protowhite Rigid Resin -1000g
Phrozen Protowhite Rigid Resin -1000g
Phrozen Protowhite Rigid Resin -1000g
Phrozen Protowhite Rigid Resin -1000g

Related Products

Related Brands