Phrozen TR250 Deep Gray Standard 3D Printer Resin provides low shrinkage. With its affordable price, Phrozen TR250 Deep Gray Standard 3D Printer Resin is a great choice for 3D printing beginners.

Benefits

• High Toughness & Low Shrinkage

• Wide Applications

Precautions

• Make sure to preserve resin at room temperature. Store in dark and ventilated conditions. 

• After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.

• Keep resin away from kids and away from direct sunlight exposure.

• Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.

• DO NOT dump resin. Please cure it and treat it as general plastic garbage.

• Weight: 500g per bottle

• Density: 1.12 g /cm3

• Viscosity: 706 cps

• Surface Hardness: 85 Shore D

• UTS: 11 MPa

• EAB: 1 %

• Tensile Modulus: 104 MPa