Protowhite Rigid Resin - Design Prototyping Made Easy

Empowered by one of the most prestigious chemical company BASF Forward AM , Phrozen Protowhite Rigid Resin enables designers to conduct in-house prototypes efficiently before moving onto the manufacturing stage.

Benefits

• Rigid Resin Empowered by BASF Forward AM: Phrozen Protowhite Rigid Resin empowers industrial designers to solve design challenges and increase efficiency during the design validation phase by creating rigid and impact resistant 3D models.

• Visualize Your Design Ideas With Ease: Turn conceptual ideas into complex 3D models to showcase small batches of high-quality prototypes for more efficient communication.

• Best for Prototype Developments: Experiment and compare various 3D printed prototypes such as mechanical parts, jigs, fixtures, and glasses to refine design usability.

• Save Time With Rapid Prototyping: Demonstrate 3D models and gather feedback from peers to identify improvements and reduce risks of design defects before going into full-scale production.

Resources

• Safety Data Sheet (Download here)

• TDS Specs (Download here)

• Resin Profile (Click here)

Precautions

• Way to Rinse: Clean with alcohol spray with an air gun. DO NOT immerse the model into alcohol for a long time.

• Use and preserve resins in room temperature, and in dark and ventilated conditions

• Shake well before each use

• After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.

• Keep resin away from kids and away from direct sunlight exposure

• Wear gloves and masks during the operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.

• DO NOT dump resin. Please cure it and treat it as general plastic garbage.

• After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year.

• Density: 1.1 g / cm3

• Viscosity 30°C: 220 mPas

• E Modulus: 2300 MPa

• Ultimate Tensile Strength: 57 MPa

• Elongation at Break: 15 %

• Flexural Modulus: 1920 MPa

• Flexural Strength: 94 MPa

• Charpy notched, 23 °C: 1.9 kJ/m²

• HDT at 1.82 MPa: 49 °C

• Surface Hardness, Shore D: 77 Shore D

*All specifications have been tested in a laboratory. Please note that certain specifications may be subject to change without prior notice.