Phrozen’s Aqua 3D Printer Resins are developed to print with speed, producing 3D printed models with high-precision and durable 3D printed parts that do not break easily.

Precautions

• Way to Rinse: Clean with alcohol spray with air gun. DO NOT immerse model into alcohol for long time.
• Use and preserve resins in room temperature, and in dark and ventilated conditions
• Shake well before each use
• After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
• Keep resin away from kids and away from direct sunlight exposure
• Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
• DO NOT dump resin. Please cure it and treat it as general plastic garbage.
• After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year

Aqua Green

• Density: 1.12 g / cm3
• Viscosity: 125 CPS
• Tensile Strength (Break): 24 Mpa
• Elongation: 21%
• I-Zod Impact Strength: 1.81 KJ/m2
• Surface Hardness, Shore D: 86 Shore D
• Water Contact Angle: 55 degree

Aqua Blue

• Density: 1.12 g / cm3
• Viscosity: 130 CPS
• Tensile Strength (Break): 24 Mpa
• Elongation: 21 %
• IZOD Impact Strength: 1.81 KJ/m2
• Surface Hardness, Shore D: 86 Shore D
• Water Contact Angle: 55 degree